JD4207 Polyethylene Glycol Gear Oil Package
Product Introduction
JD4207 is formulated with high-performance composite antioxidant with special anti-wear additives and high-performance rust preventive agents, which has excellent stability and lubricity and can greatly extend the service life of the oil.
The polyethylene glycol gear lubricant formulated with JD4207 has excellent performance, so it is especially suitable for lubrication of gears and bearings under high temperature environment, especially for large steel mills and large presses, as well as bevel gears, spiral bevel gears, helical gears, closed spur gears and worm gears.
Product Characteristics
- Low odor
- Good lubricity, long life
- Good antirust properties
- Excellent oxidation resistance
- Excellent resistance to high temperatures
Technical Specification
| Item |
Typical Data |
| Active ingredient |
100% |
| Appearance (20ºC) |
Reddish brown liquid |
| Density(20ºC), g / cm3 |
0.96 |
| Odor |
Small odor |
| Kinematic viscosity ( 40ºC), mm2/s |
246 |
Equivalent products
| Mobil |
Shell |
BASF |
KLUBER |
Total |
BP |
| Glygoyle |
Omala S4 WE |
Plurasafe GL WI |
Syntheso D EP |
Carter sy |
Enersyn
SG-XP
|
Recommended Applications of JD4207 Polyethylene Glycol Gear Oil Package
| |
150 |
220 |
320 |
460 |
680 |
1000 |
| JD4207 |
2% |
2% |
2% |
2% |
2% |
2% |
| PAG |
98% |
98% |
98% |
98% |
98% |
98% |
| Antifoam |
100ppm |
100ppm |
100ppm |
100ppm |
100ppm |
100ppm |
| Kinematic viscosity(40ºC), mm2 /s |
150 |
220 |
320 |
460 |
680 |
1000 |
| Kinematic viscosity(100ºC), mm2 /s |
24 |
36 |
52 |
73 |
101 |
145 |
| Viscosity index |
192 |
213 |
229 |
242 |
244 |
259 |
| Pour point,ºC |
-45 |
-45 |
-42 |
-39 |
-36 |
-30 |
| Rust experiment-distilled water 24h |
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
| Copper corrosion |
1a |
1a |
1a |
1a |
1a |
1a |
| Timken OK load lbs |
75 |
75 |
75 |
75 |
75 |
75 |
| FZG (A/8.3/90) |
>12 |
>12 |
>12 |
>12 |
>12 |
>12 |
| FZG (A/16.6/90) |
>12 |
>12 |
>12 |
>12 |
>12 |
>12 |
Package / Transportation / Storage
Package: 200L Drum.or IBC Tank. Suitable for container and land transportation.
Avoid direct exposure to sunlight; avoid contact with fire and heat sources; avoid mixing with water; avoid contact with strong oxidizers, strong alkalis, strong acids; open the lid and take out part of the product should be covered in time to prevent contamination of the product in the drum; long-term storage of some products darken the appearance of the product does not affect the effect of its use. If the product is frozen in low temperature, please put it in 20ºC environment and thaw it completely to use without affecting the effect. Avoid contact with eyes and swallowing. In case of contact, rinse off with cold water or seek medical attention immediately.
The final product data may vary slightly from this table due to fine-tuning or normal changes in the formula during production.
There may be a slight difference between the final product data and the table, which is normal.
Company Profile
Tianjin J&D Technology Co., Ltd
J&D Lubricant was established in 2016 and has been specializing in the field of lubricant additives and synthetic base oils and has rich experience in this field. As a well-known and professional lubricant additives manufacturer and supplier in China, we offer a wide range of additives for a variety of lubricants, such as engine oils, gear oils, hydraulic oils, ATF, marine oils and turbine oils, as well as other industrial oils, specialty oils and greases.
We have built up a wealth of experience and kept stable long-term relationships with many large oil companies in the world, especially in the US, European and Japanese markets, winning a good reputation from our customers.
Our Laboratory
The blending production and quality inspection of J&DLubricnat has been awarded the title of Advanced Scientific Laboratory in China. We also participate annually in the Global Additives Cross-Data Comparison Test organized by the American Society for Testing and Materials (ASTM) to ensure the reliability of our results.
Exhibition View
We participate in a variety of lubricant-related exhibitions around the world every year to expand our international presence and to communicate deeply with our customers, with whom we have made deep friendships!
Our Team
FAQ
Q1: What's your MOQ
A: our MOQ generally starts from 1kg
Q2: Can I get some samples?
A: Of course, You need to pay a certain fee, but if your order is large, or if you are willing to cooperate with us for a long time, we can provide you with free samples, you only need to pay the freight
Q3: Is there any discount?
A: If the order quantity is relatively large or there is a good and long-term trade cooperation with our company, we will provide a more favorable discount.
Q4. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q5. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and quantity of your order.
Q6. Do you test all your goods before delivery?
A: Yes, we will do 100% test before delivery.
Q7: How do you ensure our business long-term and good relationship?
A:1. We will keep good quality and competitive price to ensure our customers' benefit ;
2. We respect each customer as our friend and we sincerely do business and make friends with them no matter where they come from.
Audited Supplier 
){kind=link}